This istallation instructions gives us things about intake manifold, vacuum port, hose, distributor vacuum, electric choke carburetors, fuel pressure, vacuum, transmission, and washers. In this istallation instructions you can read explanation regarding square bore, wire, distributor, filter, electric choke, negative battery cable, manifold, and air.
Many discussion such as filter neoprene hose, adapter, carburetor, cable, throttle, carburetors, ignition, and screw are explained inside this istallation instructions. The following are taken from this istallation instructions:
If your distributor has timed vacuum advance, hook the vacuum hose from the Fig. 2 distributor up to the passenger side vacuum port on the carburetor. If it has full vacuum advance, hook it up to the driver’s side port. 2. The stock steel fuel line must be converted to fuel resistant rubber hose. The stock steel line will not connect to the Performer Series Carburetor. Use Edelbrock Universal Fuel Line Kit #8135. This kit contains a filter, neoprene hose and fittings to adapt 5/16″ and 3/8″ stock fuel lines (See Fig. 3). NOTE: After cutting fuel line remove sharp edges and clean out any chips.
Additionally, the istallation instructions contains info things like gasket, fuel line, choke, inlet, cleaner, intake, choke housing, and air cleaner stud.