Inside this instruction manual we can read description related to power factor, switches, output, terminals, output frequency, parameter number, speed setting, terminal, and power supply. This instruction manual presents explanation around output current, electronic overcurrent, capacity, signal, circuit, wiring, cables, and brake.
Lots of things regarding link operation mode, constant torque motor, inverter, torque, parameter, power, voltage, and resistor are presented in the instruction manual. The following are taken from the instruction manual:
Time Frequency setting signal (V) ON The inverter will not start if the frequency setting signal is less than the value set in Pr. 13 “starting frequency”. For example, when 5Hz is set in Pr. 13, the motor will not start running until the frequency setting signal reaches 5Hz. CAUTION When the Pr. 13 setting is equal to or less than the Pr. 2 value, note that merely switching on the start signal will start the motor at the preset frequency if the command frequency is not input.
Even more, the instruction manual explains information things like control, parameters, motor, multi speed setting, frequency, current, parameters, and speed.